- Drop-ins and Built-ins
- Dispensers
- Mobile Tray Dispensers - All Tubular Style
- Enclosed Tray Dispenser - Mobile Adjustable
- Mobile Cup & Glass Dispensers
- Tumbler Serve
- Mobile Cup & Glass Dispensers 2
- Countertop Silverware Dispenser
- Tray & Silverware Multi-Purpose Carts
- Multi-Purpose Carts
- Tray & Silverware Carts - With Silverware Pans
- Tray & Silverware Carts Self-Leveling
- Tray & Silverware Dispenser
- Silverware Carts
- Mobile Tray & Silverware Dispensers
- Cantilever Tray, Silverware & Napkin Dispensers 1ATCA-SN
- Cantilever Tray, Silverware & Napkin Dispensers 2ATCA-SN
- Cantilever Cup, Saucer, and Glass Dispensers
- Cantilever Tray & Sheet Pan Dispensers
- Mobile Dish Dispensers - Tubular Frame
- Mobile Dish Dispensers - Cabinet Frame
- Mobile Ice Dispensers - Cabinet Style, Mobile
- Dish Carts
- Under-Counter Dish Carts
- Merchandisers
| Model # | Description | Length | Width | Height | Ship Wt.(lbs) |
|---|---|---|---|---|---|
| ATCA-ST-1014 | 13" | 24" | 37.5" | 150 | |
| ATCA-ST-1216 | 14.5" | 25.5" | 37.5" | 150 | |
| ATCA-ST-1418 | 16" | 27.5" | 37.5" | 150 | |
| ATCA-ST-1520 | 17" | 30.5" | 37.5" | 150 | |
| ATCA-ST-1622 | 18.5" | 32" | 37.5" | 150 | |
| ATCA-ST-2020 | 21" | 29" | 37.5" | 150 | |
| 2ATCA-ST-1014 | 25.5" | 24" | 37.5" | 280 | |
| 2ATCA-ST-1216 | 29.5" | 26" | 37.5" | 280 | |
| 2ATCA-ST-1418 | 32.5" | 27.5" | 37.5" | 280 | |
| 2ATCA-ST-1520 | 39" | 20.5" | 37.5" | 280 | |
| 2ATCA-ST-1622 | 37.5" | 32" | 37.5" | 280 | |
| ASCA-ST-1826 | 20" | 35.5" | 37.5" | 170 |
FRAME AND BODY
The frame is constructed of all welded heavy gauge stainless steel. The body is stainless steel on all sides and top, and is fitted with a stainless steel tubular push handle. Model 2ATCA-ST is constructed similarly to Model ATCA-ST except that it consists of a double size frame and body and has two independent tray carriers and dispensing mechanisms to accommodate two stacks of trays. The front panel is removable for adjustment access.
DISPENSING MECHANISMM
The tray and pan carriers (two on Model 2ATCA-ST), constructed of all welded 16 ga. stainless steel, are each raised by a series of coil springs attached to the frame. Ball bearing guides and a single stainless steel aircraft type cable keep each carrier level in all directions, even with an unbalanced load. The cable runs over pre-lubricated plated steel pulleys.
ADJUSTMENT
Adjustment for various tray or pan weights is easily accomplished by removing the front panel, then engaging or disengaging individual springs as required.
CASTERS
Each unit is mounted on four 4" diameter, heavy duty, swivel, casters.
AVAILABLE OPTIONS
| Model # | Description |
|---|---|
| B | Corner Bumper (adds 2” to overall length and width) |
| PB | Full Perimeter Bumper (adds 2” to overall length and width) |
| WB | Two locking casters |
| Y4 | Polyurethane 4 |
| Y5 | Polyurethane 5 |
File Downloads
| File | Description | Size | |
|---|---|---|---|
| E-17.PDF | SPEC: Tray & Sheet Pan Dispensers Cantilever Style | N/A | |
| Dispenser Mini.pdf | Dispenser Mini Catalog |
4.47 MB | |
| Cantilever Tray and Rack Dispenser Manual.pdf | Cantilever Dispenser Manual |
867 KB | |