Multipurpose Carts

SPECIFICATIONS

715 Series tray and silverware carts for silverware in cylinders.

FRAME: The frame is constructed of 1" O.D. 16 ga. stainless steel tubing formed to support an overhead silverware dispenser and to serve as push handles at both ends.

SHELVES: Each shelf is press formed from a single sheet of 18 ga. stainless steel. It is flanged down 1-5/16" on all four sides and formed back at a 30º angle for rigidity. Each inside corner is fitted with an ABS black plastic bracket and sleeve to accommodate an upright. The bottom shelf on all models is set 8" above the floor. With 10" clearance between shelves on 2 shelf models.

SILVERWARE DISPENSER: The dispenser is constructed of all welded 18 ga. stainless steel and is securely fastened to the top of the tubular frame. The top is canted and has round openings to accommodate plastic or stainless steel silverware cylinders. (Cylinders not included).

CASTERS: The units are mounted on four 4" diameter heavy duty, swivel casters.

MODEL 715-1-A8: The unit has one bottom shelf and openings for eight silverware cylinders.

MODEL 715-1-A10: The unit has one bottom shelf and openings for ten silverware cylinders.

MODEL 715-1-A12: The unit has one bottom shelf and openings for twelve silverware cylinders.

MODEL 715-1-A15: The unit has one bottom shelf and openings for fifteen silverware cylinders.

MODEL 715-2-A8: The unit has two shelves and openings for eight silverware cylinders.

MODEL 715-2-A10: The unit has two shelves and openings for ten silverware cylinders.

MODEL 715-2-A12: The unit has two shelves and openings for twelve silverware cylinders.

MODEL 715-2-A15: The unit has two shelves and openings for fifteen silverware cylinders.

CAPACITY: Approximately 150-300 trays, 15-1/4" x 20-1/2" maximum size; 35-40 pieces of silverware in each cylinder.

OVERALL DIMENSIONS: 36" long, 21 3/8" wide, 45" high.

NOTE: Add 3" to length and width for rotating bumpers.