Spec
R-2-B
Load
Dowload Spec Sheet

Berkeley Series Hot Plates

Built-ins and Drop-ins

Berkeley
Berkeley
Prev Next
Hot-Spot-Closeup.jpg
2-Berkeleys.jpg
Model # Description Length Depth Hot Plate Sections Ship Wt.(lbs)
D14050 DROP-IN SERIES STANDARD DEPTH 18" 22" 1 65
D16050 DROP-IN SERIES STANDARD DEPTH 26" 22" 1 88
D24050 DROP-IN SERIES STANDARD DEPTH 34" 22" 2 130
D26050 DROP-IN SERIES STANDARD DEPTH 49.75" 22" 2 175
D240160 DROP-IN SERIES STANDARD DEPTH 57.875" 22" 3 185
D36050 DROP-IN SERIES STANDARD DEPTH 73.5" 22" 3 200
D14050-HS DROP-IN SERIES STANDARD DEPTH 18" 22" 1 65
D16050-HS DROP-IN SERIES STANDARD DEPTH 26" 22" 1 88
D24050-HS DROP-IN SERIES STANDARD DEPTH 34" 22" 2 130
D26050-HS DROP-IN SERIES STANDARD DEPTH 49.75" 22" 2 175
D240160-HS DROP-IN SERIES STANDARD DEPTH 57.875" 22" 3 185
D36050-HS DROP-IN SERIES STANDARD DEPTH 73.5" 22" 3 200
D37060 DROP-IN SERIES EXTRA DEEP 73.5" 30" 3 280
D37060-HS DROP-IN SERIES EXTRA DEEP 73.5" 30" 3 280
B14050 BUILT-IN SERIES STANDARD DEPTH 15.75" 19.69" 1 65
B16050 BUILT-IN SERIES STANDARD DEPTH 23.62" 19.69" 1 88
B24050 BUILT-IN SERIES STANDARD DEPTH 31.65" 19.69" 2 130
B26050 BUILT-IN SERIES STANDARD DEPTH 47.4" 19.69" 2 175
B240160 BUILT-IN SERIES STANDARD DEPTH 55.43" 19.69" 3 185
B36050 BUILT-IN SERIES STANDARD DEPTH 71.18" 19.69" 3 200
B14050-HS BUILT-IN SERIES STANDARD DEPTH 15.75" 19.69" 1 65
B16050-HS BUILT-IN SERIES STANDARD DEPTH 23.62" 19.69" 1 88
B24050-HS BUILT-IN SERIES STANDARD DEPTH 31.65" 19.69" 2 130
B26050-HS BUILT-IN SERIES STANDARD DEPTH 47.4" 19.69" 2 175
B240160-HS BUILT-IN SERIES STANDARD DEPTH 55.43" 19.69" 3 185
B36050-HS BUILT-IN SERIES STANDARD DEPTH 71.18" 19.69" 3 200
B17060 BUILT-IN SERIES EXTRA DEEP 23.62" 27.56" 1 124
B27060 BUILT-IN SERIES EXTRA DEEP 47.4" 27.56" 2 245
B37060 BUILT-IN SERIES EXTRA DEEP 71.18" 27.56" 3 280
B17060-HS BUILT-IN SERIES EXTRA DEEP 23.62" 27.56" 1 124
B27060-HS BUILT-IN SERIES EXTRA DEEP 47.4" 27.56" 2 245
B37060-HS BUILT-IN SERIES EXTRA DEEP 71.18" 27.56" 3 280

Piper’s Berkeley Series Hot Plates offer an attractive and flexible approach to the display of foods that need to be kept hot, but sell best when displayed to their advantage. These electrically heated units are available in several ways, as drop-in or built-in models for use in serving counters to replace steam pans that hide the food; or as portable counter top models that can be easily relocated as required. Units are provided with either one, two or three (drop-in models only) individually controlled hot plate sections. All models can be provided with an optional "hot spot”; (except with built-in model) or, with an optional sneeze guard with quartz heater for more even heating.

CONSTRUCTION

  • A black Ceran Pyroceramic hot plate, with mat-type heating element adhered to underside, set into rectangular base frame and rests on support angles fastened to the inside of frame
  • Equipped with a 16 gauge stainless steel flange around the full perimeter of the frame to support the unit when it is dropped into a counter cut-out
  • Hot plate separated from frame by band of high temperature silicone
  • Frame is constructed of stainless steel
  • Space beneath the heating element filled with insulation and enclosed by a removable, perforated stainless steel bottom access panel
  • Unit equipped with a surrounding protective handle constructed of all welded tubular stainless steel, attached to the base frame with horizontal spacers
  • All models are provided with 8' long cord with matching NEMA # plug as shown on specification chart (see back for additional information)
  • Temperature of the hot plate surface is adjustable to a maximum of 250ºF

CONTROLS

  • All models equipped with toggle master on/off switch and an infinite control with separate pilot light (one for each section of the hot plate)
  • Controls for the hot plate are mounted on the rear of the base frame

OPTIONS

SNEEZE GUARD WITH HEAT LAMP

  • Optional sneeze guard with heat lamp available for all models
  • Quartz heat lamp(s) are mounted in a channel shaped stainless steel housing which is mounted to tubular uprights
  • Uprights are 1" diameter "U” shaped stainless steel, welded to the frame at each end
  • Housing is coated to match the finish of base frame and is enclosed with stainless steel bottom plate with recesses into which the quartz lamps are mounted
  • Up to four 375 watt quartz lamps are provided, based on length of unit
  • One end of housing is fitted with a blower to maintain safe temperatures
  • An adjustable dimmer control is mounted to the housing. The intensity of the heat lamp can be adjusted by the operator
  • The curved sneeze guard is 1/4" thick acrylic. Sneeze guards are designed for self-service

HOT SPOTS

  • Optional 1700 watt Hot Spot is available for all models
  • Maximum of one Hot Spot can be provided per unit
  • The Hot Spot can provide up to a maximum of 800ºF, ideal for holding soup, boosting heat, wok cooking and various other options
Read California Proposition 65 Warning

File Downloads

File Description Size
R-2-B.PDF SPEC: Berkeley Series Hot Plates Built-ins and Drop-ins N/A
Berkeley Hotplate Manual.pdf
Berkeley Hot Plate Manual
1.47 MB