Hot Multi-Well Drop-Ins

Piper’s HFW-1 Multiple Well Drop-ins add a dependable, convenient and economical hot food unit to your counter section. Designed to be used wet or dry, and installed into all-metal counter fixtures. Multiple well units are available with or without drains.

ASSEMBLY STRUCTURE

• One-piece top-mounting flange is stainless steel with die-stamped openings in which the wells are mounted
• Individual wells are 20-gauge stainless steel, one-piece, die-stamped construction
• Locks are included on all sides to fasten unit into the countertop
• Units are fully insulated for high heat transfer
• Drains are manifolded together and include fittings at each end for field attachment of the pipe cap and 3/4 NPT drain valve provided

The recommended mounting procedure is to seal the one-piece top-mounting flange to the countertop by application of silicone NSF Standard 51 rated at 450 F around the topmounting flange before mounting in place.

ELECTRICAL

• All units available in 208/240V - 1200W/1600W, single-phase or 3-phase. Specify voltage and phase needed.
• Each well is individually controlled with an infinite control and high limit thermostat with indicator light
• Models with the suffix "T” (example: 2HFW-1T) have thermostat controls in place of the infinite control and high limit

NOTE: Consult factory for part number and availability of thermostat control units

AUTO WATER FILL OPTION

• An optional automatic water fill is available on all units with drains and manifold
• Auto-fill system allows the unit to maintain the proper water level in each well
• A water level sensor is located in one well and a solenoid and water filter is located under the wrapper bottom
• To add this option add the suffix "AF” (example: 2HFW-1AF) to the model number

NOTE: Consult factory for part number and availability of units with auto-fill option